BHTCM - 94803 BIOBOND OPAQUING MEDIUM
- MSDS: BHTCM
- Manufacturer: DENTSPLY INTERNATIONAL INC
- Product Name: 94803 BIOBOND OPAQUING MEDIUM
- National Stock Number: 6520-00F010707
Product Identification
Product ID:94803 BIOBOND OPAQUING MEDIUM
MSDS Date:01/01/1987
FSC:6520
NIIN:00F010707
MSDS Number: BHTCM
Responsible Party
YORK, PA 17405
Emergency Phone: (717) 845-7511
Info Phone: (717) 845-7511
Cage: 8T797
Contractor
Telephone: 717-845-7511
Cage: 16969
Ingredients
ETHYLENEDIAMINE (SARA III)
CAS: 107-15-3
RTECS: KH8575000
Fraction By Weight: 0.015%
OSHA PEL 10 PPM
ACGIH TLV: S, 10 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER, H2O
CAS: 7732-18-5
RTECS: ZC0110000
WATER SOLUBLE POLYMER
ACETATE ESTER
KETONE
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: IRRITANT. INGESTION:
HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITANT. INGESTION: HARMFUL.
First Aid
First Aid:SKIN: FLUSH W/WATER, REMOVE ALL CONTAMINATED CLOTHING. EYES:
FLUSH W/WATER FOR 15 MINUTES. INGESTION: DILUTE W/LARGE QUANTITIES
OF WATER, CALL PHYSICIAN. INHALATION: REMOVE TO FRESH AIR.
Fire Fighting
Flash Point:NOT FLAMMABLE
Accidental Release
Spill Release Procedures:DILUTE WITH WATER.
Handling
Handling and Storage Precautions:DON'T TAKE INTERNALLY. AVOID CONTACT
W/SKIN & EYES. WASH THOROUGHLY AFTER HANDLING. USE WITH ADEQUATE
VENTILATION.
Other Precautions:THIS MATERIAL SHOULD BE HANDLED & USED ONLY IN A
MANNER CONSISTENT WITH THE PRODUCT INSTRUCTIONS.
Exposure Controls
Respiratory Protection:NOT REQUIRED
Ventilation:GENERAL ROOM VENTILATION
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE ALL
CONTAMINATED CLOTHING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:32F
Spec Gravity:1.0
pH:6.3
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID WITH FAINT ODOR
Percent Volatiles by Volume:99%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Disposal
Waste Disposal Methods:READILY BIODEGRABLE IN WASTE WATER TREATMENT
PLANT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.